WDZ YJV Type 4 Core Fire Resistant Cable , XLPE LZSH Cable Cu – Conductor

Fire resistant cable Applications

These cables are used for electricity supply in low voltage installation system, They are suitable for installation in indoors and outdoors, in cable ducts, under ground, in power and switching stations, local energy distributions, industrial plants, where there is no risk of mechanical damage.
Fire resistant cable Construction

1. Conductors

The conductors shall be either of Class 1 or Class 2 of plain or metal-coated annealed copper or of plain aluminium or aluminium alloy, or of Class 5 of plain or metal-coated copper in accordance with IEC 60228.
2. Insulation

XLPE material and thickness shall be as per IEC 60502 or BS 5467 rated for 90°C continuous operation.
3. Assembly / Inner Covering

The inner coverings may be extruded or lapped. For cables with circular cores, except cables with more than five cores, a lapped inner covering shall be permitted only if the interstices between the cores are substantially filled. A suitable binder is permitted before application of an extruded inner covering. The material is compatible with the insulating material,The materials used for inner coverings and fillers shall be suitable for the operating temperature of the cable and compatible with the insulating material.For halogen free cables, the inner covering and fillers shall also be halogen free compound.
4. Armour

Aluminum/galvanized steel/steel wires applied helically over the Inner Covering as per IEC 60502-1, or double aluminum/steel tapes and copper/tinned copper wire can also be manufactured upon request.
5. Outer Sheath

Outer sheath shall be of extruded PVC Type ST1/ST2 as per IEC 60502-1, Polyethylene type ST3/ST7, Halogen free compound ST8, Polychloroprene, chlorosulfonated polyethylene or similar polymers, type SE1 are also available on request.
6. Fire Performance of Cable Sheaths

Cables can be supplied with special flame retardant PVC outer sheath to comply with the flame test requirements of IEC 60332-3-22, IEC 60332-3-23 and IEC 60332-3-24, Halogen Free material comply to IEC60754-1/2 and IEC 60684-2.

No.cores x
cross-sec.

Insulation
thickness

Nominal

Sheath
thickness

Outer Ø
approx.

weight
approx.

Current ratings in air 30℃

Current ratings buried 20℃

maximum DC resistance at 20℃

mm²

mm

mm

mm

kg / km

A

A

Ω/km

4×4

1.0

1.8

18.2

529

30

37

4.61

4×6

1.0

1.8

19.3

641

38

46

3.08

4×10

1.0

1.8

22.5

905

53

64

1.83

4×16

1.0

1.8

25.0

1218

71

83

1.15

4×25

1.2

1.8

29.2

1690

94

108

0.73

4×35

1.2

1.9

33.5

2479

117

132

0.52

4×50

1.4

2.0

34.3

2963

140

157

0.39

4×70

1.4

2.2

37.8

3831

178

196

0.27

4×95

1.6

2.4

43.1

5032

219

234

0.19

4×120

1.6

2.5

46.3

6105

255

268

0.15

4×150

1.8

2.6

51.0

7475

294

301

0.12

4×185

2.0

2.8

56.2

9070

333

338

0.10

4×240

2.2

3.0

61.3

11664

397

393

0.08

4×300

2.4

3.2

69.3

15018

464

448

0.06

A1 – Thermally insolated wall (Single-core)

A2 – Thermally insolated wall (multi-core)

B1 – Apparent electroduct (Single-core)

B2 – Apparent electroduct (multi-core)

B1 – Electroduct in brickwork (Single-core)

B1 – Electroduct in brickwork (multi-core)

C – On the wall

　C – On the ceiling

C – Non-perforated tray

F – Perforated tray (Single-core)

F – Perforated tray (multi-core)

F –Suspended (Single-core)

E – Suspended (multi-core)

B2 – Construction space

B2 – Construction space

B1 – Electroduct (Single-core)

B2 – Electroduct (Multi-core)

B2 – Closed raceway embedded in floor (multi-core)

B2 – Closed raceway embedded in floor (multi-core)

B1 – Ventilated raceway embedded in floor

C – Embedded in the brickwork

D – Buried in additional mechanical protection

CABLE DRUMS

D1=Flange Diameter(mm)

W=Useful Width (mm)

D2=Barrel Diameter(mm)

1000

700

500

1100

700

550

1200

700

600

1400

750

710

1600

900

900

1800

1120

1000

2400

1150

1300