Type SHD-GC Special Cables EPR Insulated And CPE / TPU Jacket Heat Resistant
Type SHD-GC Special Cables EPR Insulated And CPE / TPU Jacket Heat Resistant image
Brand Name :
CN CABLE
Model Number :
SHD-GC
Certification :
CE
Place of Origin :
Henan
MOQ :
500meters
Payment Terms :
L/C, T/T
Delivery Time :
30days after payment
Packaging Details :
Iron-wooden drum
Phase, Grounding Conductors, Ground check conductors :
Soft or annealed tinned coated copper
Conductor Shield :
A helically applied semiconducting tape
Insulation :
EPR
Insulation Shield :
An overlapped semiconducting tape shall be applied over the insulation.
Metallic Component :
A composite fiber-copper braid shield, tinned coated copper wires, Coverage
Assembly :
Phase, ground check and grounding conductors cabled together with hygroscopic fillers and a
Ground Check :
Polypropylene insulation yellow colored for identification
Jacket :
CPE
Type SHD-GC Special Cables EPR Insulated And CPE / TPU Jacket Heat Resistant
APPLICATION
Trailing cable on ac mining equipment where service conditions are severe and maximum safety is mandatory; such as
power shovels and drag lines in open-pit mines, quarries, gantry cranes and slag reclaiming.
Used for high voltage distribution in underground mines where frequent relocation is necessary or where extra
flexibility and toughness is desired.
Meets all requirements of ICEA S-75-381.
CHARACTERISTIC
Excellent flexibility
Highly ozone, sun, weather and flame resistant
Excellent impact and abrasion resistant
Rated and flexible at -500C
Oil and heat resistant
1. Phase, Grounding Conductors, Ground check conductors: Soft or annealed tinned coated copper
conductor, rope lay flexible stranding per ASTM B172
2. Conductor Shield: A helically applied semiconducting tape.
3. Insulation: High quality, heat, moisture, ozone and thermosetting ethylene propylene rubber (EPR)
meeting ICEA.
4. Insulation Shield: An overlapped semiconducting tape shall be applied over the insulation.
5. Metallic Component: A composite fiber-copper braid shield, tinned coated copper wires, Coverage
minimum 60 ,with colored fibers for phase identification (black, white, red).
6. Assembly: Phase, ground check and grounding conductors cabled together with hygroscopic fillers and a
binder tape.
7. Ground Check: Polypropylene insulation yellow colored for identification.
8. Jacket(CPE): Heavy duty or extra heavy duty chlorinated polyethylene (CPE) compound, applied in one
layer over a fibrous reinforcement layer, Black or other colors can be provided.
8. Jacket(TPU): Extra heavy duty, high torsion resistant, integral-filled, thermoplastic Polyurethane jacket,
Black or other colors can be provided.
Technical Data
SHD-GC 2 kV | |||||||||
Selection data | |||||||||
Power conductor size |
Power conductor stranding |
Nominal thickness of insulation |
Jacket thickness |
Grounding conductor | Approximate overall diameter |
Ampacity 40°Cambient temperature |
|||
Size | Stranding | ||||||||
AWG or MCM | Inches | Inches | AWG | Inches | A | ||||
6 | 133 | 7×19 | 0.070 | 0.155 | 10 | 49 | 7×7 | 1.26 | 93 |
4 | 259 | 7×37 | 0.070 | 0.155 | 8 | 133 | 7×19 | 1.36 | 122 |
2 | 259 | 7×37 | 0.070 | 0.170 | 6 | 133 | 7×19 | 1.55 | 159 |
1 | 259 | 7×37 | 0.080 | 0.170 | 5 | 133 | 7×19 | 1.71 | 184 |
1/0 | 266 | 19×14 | 0.080 | 0.190 | 4 | 259 | 7×37 | 1.81 | 211 |
2/0 | 342 | 19×18 | 0.080 | 0.205 | 3 | 259 | 7×39 | 1.94 | 243 |
3/0 | 418 | 19×22 | 0.080 | 0.205 | 2 | 259 | 7×37 | 2.07 | 279 |
4/0 | 532 | 19×28 | 0.080 | 0.220 | 1 | 259 | 7×37 | 2.24 | 321 |
250 | 627 | 19×33 | 0.095 | 0.220 | 1/0 | 266 | 19×14 | 2.44 | 355 |
300 | 740 | 37×20 | 0.095 | 0.235 | 1/0 | 266 | 19×14 | 2.70 | 395 |
350 | 888 | 37×24 | 0.095 | 0.235 | 2/0 | 342 | 19×18 | 2.73 | 435 |
500 | 1221 | 37×33 | 0.095 | 0.265 | 4/0 | 532 | 19×28 | 3.10 | 536 |
SHD-GC 5 kV | |||||||||
Selection data | |||||||||
Power conductor size |
Power conductor stranding |
Nominal thickness of insulation |
Jacket thickness |
Grounding conductor | Approximate overall diameter |
Ampacity 40°Cambient temperature |
|||
Size | Stranding | ||||||||
AWG or MCM | Inches | Inches | AWG | Inches | A | ||||
6 | 133 | 7×19 | 0.110 | 0.185 | 10 | 49 | 7×7 | 1.51 | 93 |
4 | 259 | 7×37 | 0.110 | 0.185 | 8 | 133 | 7×19 | 1.60 | 122 |
2 | 259 | 7×37 | 0.110 | 0.205 | 6 | 133 | 7×19 | 1.79 | 159 |
1 | 259 | 7×37 | 0.110 | 0.205 | 5 | 133 | 7×19 | 1.88 | 184 |
1/0 | 266 | 19×14 | 0.110 | 0.220 | 4 | 259 | 7×37 | 1.98 | 211 |
2/0 | 342 | 19×18 | 0.110 | 0.220 | 3 | 259 | 7×37 | 2.12 | 243 |
3/0 | 418 | 19×22 | 0.110 | 0.235 | 2 | 259 | 7×37 | 2.26 | 279 |
4/0 | 532 | 19×28 | 0.110 | 0.235 | 1 | 259 | 7×37 | 2.51 | 321 |
250 | 627 | 19×33 | 0.120 | 0.250 | 1/0 | 266 | 19×14 | 2.57 | 355 |
350 | 888 | 37×24 | 0.120 | 0.265 | 2/0 | 342 | 19×18 | 2.83 | 435 |
500 | 1221 | 37×33 | 0.120 | 0.280 | 4/0 | 532 | 19×28 | 3.18 | 536 |
SHD-GC 8 kV | |||||||||
Selection data | |||||||||
Power conductor size |
Power conductor stranding |
Nominal thickness of insulation |
Jacket thickness |
Grounding conductor | Approximate overall diameter |
Ampacity 40°Cambient temperature |
|||
Size | Stranding | ||||||||
AWG or MCM | Inches | Inches | AWG | Inches | A | ||||
4 | 259 | 7×37 | 0.150 | 0.205 | 8 | 133 | 7×19 | 1.93 | 93 |
2 | 259 | 7×37 | 0.150 | 0.220 | 6 | 133 | 7×19 | 2.02 | 122 |
1 | 259 | 7×37 | 0.150 | 0.220 | 5 | 133 | 7×19 | 2.10 | 159 |
1/0 | 266 | 19×14 | 0.150 | 0.220 | 4 | 259 | 7×37 | 2.21 | 184 |
2/0 | 342 | 19×18 | 0.150 | 0.235 | 3 | 259 | 7×37 | 2.34 | 211 |
3/0 | 418 | 19×22 | 0.150 | 0.250 | 2 | 259 | 7×37 | 4.49 | 243 |
4/0 | 532 | 19×28 | 0.150 | 0.250 | 1 | 259 | 7×37 | 2.63 | 279 |
250 | 627 | 19×33 | 0.150 | 0.250 | 1/0 | 266 | 19×14 | 2.75 | 321 |
350 | 888 | 37×24 | 0.150 | 0.280 | 2/0 | 342 | 19×18 | 3.05 | 355 |
500 | 1221 | 37×33 | 0.150 | 0.295 | 4/0 | 532 | 19×28 | 3.39 | 435 |
SHD-GC 15 kV | |||||||||
Selection data | |||||||||
Power conductor size |
Power conductor stranding |
Nominal thickness of insulation |
Jacket thickness |
Grounding conductor | Approximate overall diameter |
Ampacity 40°Cambient temperature |
|||
Size | Stranding | ||||||||
AWG or MCM | Inches | Inches | AWG | Inches | A | ||||
2 | 259 | 7×37 | 0.210 | 0.235 | 6 | 133 | 7×19 | 2.31 | 164 |
1 | 259 | 7×37 | 0.210 | 0.235 | 5 | 133 | 7×19 | 2.40 | 187 |
1/0 | 266 | 19×14 | 0.210 | 0.250 | 4 | 259 | 7×37 | 2.52 | 215 |
2/0 | 342 | 19×18 | 0.210 | 0.250 | 3 | 259 | 7×37 | 2.60 | 246 |
3/0 | 418 | 19×22 | 0.210 | 0.265 | 2 | 259 | 7×37 | 2.79 | 283 |
4/0 | 532 | 19×28 | 0.210 | 0.265 | 1 | 259 | 7×37 | 2.90 | 325 |
250* | 627 | 19×33 | 0.210 | 0.265 | 1/0 | 266 | 19×14 | 3.05 | 355 |
350* | 888 | 37×24 | 0.210 | 0.280 | 2/0 | 342 | 19×18 | 3.31 | 435 |
500* | 1221 | 37×33 | 0.210 | 0.295 | 4/0 | 532 | 19×28 | 3.72 | 536 |
SHD-GC 25 kV | |||||||||
Selection data | |||||||||
Power conductor size |
Power conductor stranding |
Nominal thickness of insulation |
Jacket thickness |
Grounding conductor | Approximate overall diameter |
Ampacity 40°Cambient temperature |
|||
Size | Stranding | ||||||||
AWG or MCM | Inches | Inches | AWG | Inches | A | ||||
2 | 259 | 7×37 | 0.295 | 0.235 | 6 | 133 | 7×19 | 2.55 | 178 |
1 | 259 | 7×37 | 0.295 | 0.265 | 5 | 133 | 7×19 | 2.86 | 191 |
1/0 | 266 | 19×14 | 0.295 | 0.265 | 4 | 259 | 7×37 | 2.91 | 218 |
2/0 | 342 | 19×18 | 0.295 | 0.280 | 3 | 259 | 7×37 | 3.06 | 249 |
3/0 | 418 | 19X22 | 0.295 | 0.280 | 2 | 259 | 7×37 | 3.19 | 286 |
4/0 | 532 | 19×28 | 0.295 | 0.295 | 1 | 259 | 7×37 | 3.34 | 327 |
250* | 627 | 19×33 | 0.295 | 0.295 | 1/0 | 266 | 19×14 | 3.43 | 360 |
350* | 888 | 37×24 | 0.295 | 0.295 | 2/0 | 342 | 19×18 | 3.66 | 435 |
We are China Type SHD-GC Special Cables EPR Insulated And CPE / TPU Jacket Heat Resistant manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Tags: copper welding cable, Special Cables, special power cable