Aluminum Conductor Steel Tape 5 Core 0.6/1kv PVC Insulated Cables

Steel Tape Armour 1-5 Core 0.6-1kv PVC Insulated and Jacket Aluminum Conductor Cable​

Description:
0.6/1KV PVC Insulated Cables
IEC60502,IEC60228,GB/T 12706.1-2008
CE,CCC,ISO

Construction:

Conductors:Copper or Aluminium conductor, round standed or Shaped, Class 2 to IEC 60228, BS EN 60228. For smaller sizes, a solid round conductor, Class 1 as per IEC 60228, BS EN 60228 can also be supplied upon request.

Noted: Insulation color as per standards or customer requirement.

Application:

These cables are used for electricity supply in low voltage installation system, They are suitable for installation in indoors and outdoors, in cable ducts, under ground, in power and switching stations, local energy distributions, industrial plants, where there is no risk of mechanical damage.

steel tape armored aluminum cable 5core xlpe insulated with nominal voltage 0.6-1kv​ Construction

Standard: IEC60502-1, GB/T 12706

•Conductor: Copper or Aluminium conductor, round standed or Shaped, Class 2 to IEC 60228, BS EN 60228. For smaller sizes, a solid round conductor, Class 1 as per IEC 60228, BS EN 60228 can also be supplied upon request.

•XLPE Insulation material and thickness shall be as per IEC 60502 or BS 5467 rated for 90°C continuous operation.

• PVC Sheath shall be of Extruded PVC Type ST2 as per IEC 60502-1 or Type 9 as BS 6346/5467.Special type of PVC sheathing material such as Fire Retardant PVC, Anti-Termite PVC, Anti-Rodent PVC, Sunlight resistant PVC, Oil Resistant PVC are available on special request. Also, special sheathing materials such as LDPE, MDPE, HDPE,LSF, CPE are available on request.

Technical data

Operating voltage:600/1000 V

Test voltage: 3500V, according to IEC 60502

Operation temperature:–25°C to + 90°C

Permissible short therm: + 250°C

Lowest ambient temperature:–25°C

Bending radius:

1.5mm2 to 16mm2 – Fixed: 6 x overall diameter

25mm2 and above – Fixed: 8 x overall diameter

Special version upon request

Fire resistant version

LSZH sheath version

AWA,SWA,STA armoured version

PE sheath version

Cable Parameters:

Why Choose Zhenglan Cable:

• OEM/ODM services provided;
• Products comply with GB, IEC, BS, ASTM, DIN, VDE and JIS standards; Customer standard requirments Accepted;
• Certified to ISO 9001:2015, ISO 14001:2015 and OHSAS 18001:2007;
• Registered capital of $30 million and factory covers an area of 60,000㎡;
• Advanced test equipment and procedures, 100% inspection before factory;
• Enough stocks and the higest efficient shipping time guarranteed;
• Professional pre-sales and after-sales services provided.

Zhenglan Cable Technology Co., Ltd (www(.)zhenglancable(.)com), is CE and ISO approved China cable and wire manufacturer with about 20 years' experience located in Zhengzhou, Henan province, middle of China.

Our main products are
overhead power transmission use bare conductor(ACSR, AAC, etc)
1kv, 10kv, 35kv overhead power transmission use insulated conductor(single core covered cable, ABC cable)
STA/SWA armored or unarmored PVC/XLPE/PE insulated LV(low voltage) power cable
STA/SWA armored or unarmored XLPE insulated MV(medium voltage)power cable
450/750V instrument use control cable (shielded or unshielded)
300/300V, 300/500V, 450/750V fixed installation use building wire