60KN Pulling Force Hydraulic Puller Tensioner Fully Hydraulic Controlled 3.8X2.1X2.3 M

60KN Pulling Force Hydraulic Puller Tensioner Fully Hydraulic Controlled 3.8X2.1X2.3 M

110KV transmission line stringing equipments are used for overhead 110KV transmission line single or bundled cnductors stringing operation. We normally used 6 ton hydraulic puller with 4 ton hydraulic tensioner for single 500-630 mm2 conductor, or two of 3 ton hydraulic tensioner for 2 bundled conductors in 110KV transmission line.

SA-YQ60 Hydraulic Puller

Application:

The hydraulic puller is used to pull pilot steel wire rope for conductors stringing. It is fully hydraulic controlled, easily used and maintained

Features:

– Closed hydraulic circuit,infinitely variable speed control in both rotating directions.

– The max pulling force for stringing operation can be preset, pulling force in the rope can be read on the line pull gauge.

– Automatic over pulling protection system

– Spring applied hydraulic released brake acts automatically in case of hydraulic failure to ensure safety.

– Hydraulic oil cooling system.

– Heat treated wear-proof bull wheels

– With rigid axle for towing at high speed, the machine looks beautiful.

– Integral self-loading reel winder with automatic level wind.

– Mounted on trailer with rigid axle for towing at max. speed of 15 km/h on work site.

Main Components:

– Engine: Cummins water-cooled diesel engine.

– Main variable displacement hydraulic pump and main motor: Rexroth (German)

– Reducer: R.R. (Italian)

– Reel winder motor: Danfoss (Danish)

– Main hydraulic valves: Rexroth (German)

– Hydraulic instruments: WIKA (German)

– Radiator: AKG (German)