IEC 60502-1 Aerial Insulated Cable Of Rated Voltage Up To And Inculding 1KV AL/XLPE
IEC 60502-1 Aerial Insulated Cable Of Rated Voltage Up To And Inculding 1KV AL/XLPE image
Aerial Insulated Cables Of Rated Voltage Up To And Inculding 1KV AL/XLPE Transmission IEC 60502-1
Aerial Bundle Cable (ABC cable) is a very innovative concept for overhead power distribution as compared to the conventional bare conductor overhead distribution system. It provides higher level of safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost.
1kV aerial bundled cable Construction:
1.Conductor: Aluminium conductor, round stranded compressed (RM).
2.insulation: XPLE compound, UV-resistant.
3.Core identification: 1, 2 resp. 3 raised longitudinal ribs on the surface of the cores. The surface of the neutral core should have at least 12 ribs for cross-sections up to 50 mm² and a minimum of 16 ribs for cores above 50 mm². In the case of five core bundles the surface of the protective core should be smooth.
4. Insulated neutral messenger: AAAC – All Alloy Aluminium 6201 – Bare.
1kV aerial bundled cable without street lighting +NA(AAAC/Bare)Main characteristics:
Decreases energy theft, cross-linked polyethylene allows more current capacity and high insulation resistance, lower inductive reactance than with bare conductors, used in overhead distribution lines. Increased safety due to its mechanical strength and toughness of the insulation. Insulators are not necessary for installation. Resistance to abrasion, weather and sunlight.
Core identification:
Phase core identificated by number 1, 2, 3 or ribs
Neutral core identificated by company name, model&size, voltage, meter mark infor or by full ribs as per requirement
1kV aerial bundled cable parameters
| CAAI 0,6/1 kV AAAC Covered Neutral without Public Lighting | |||||||||
| Nb. of cores | Phase Cond. Cross Section [mm²] | N° aluminium wires |
Phase conductor diameter(mm) | Min Insulation thickness(mm) | Neutral conductor | MIn.Insulat.Thick of Neutral messenger(mm) | Nom. outer diam(mm) | Approx. weight [kg/km] | |
| sectional area(mm2) | conductor diameter(mm) | ||||||||
| 1 | 16 | 7 | 5 | 1.15 | 25 | 6.4 | 1.15 | 16.2 | 168 |
| 1 | 25 | 7 | 5.8 | 1.15 | 25 | 6.4 | 1.15 | 17 | 196 |
| 2 | 16 | 7 | 5 | 1.15 | 25 | 6.4 | 1.15 | 17.3 | 236 |
| 2 | 25 | 7 | 5.8 | 1.15 | 25 | 6.4 | 1.15 | 18.2 | 291 |
| 2 | 35 | 7 | 6.9 | 1.15 | 25 | 6.4 | 1.15 | 19.7 | 354 |
| 2 | 35 | 7 | 6.9 | 1.15 | 50 | 9.1 | 1.53 | 22.8 | 453 |
| 2 | 50 | 19 | 8.1 | 1.53 | 35 | 7.6 | 1.15 | 23.7 | 489 |
| 2 | 50 | 19 | 8.1 | 1.53 | 50 | 9.1 | 1.53 | 25.3 | 554 |
| 2 | 70 | 19 | 9.8 | 1.53 | 50 | 9.1 | 1.53 | 27.7 | 692 |
| 3 | 16 | 7 | 5 | 1.15 | 25 | 6.4 | 1.15 | 18.7 | 304 |
| 3 | 25 | 7 | 5.8 | 1.15 | 25 | 6.4 | 1.15 | 20.2 | 386 |
| 3 | 25 | 7 | 5.8 | 1.15 | 35 | 7.6 | 1.15 | 20.8 | 420 |
| 3 | 35 | 7 | 6.9 | 1.15 | 25 | 6.4 | 1.15 | 22.2 | 480 |
| 3 | 50 | 19 | 8.1 | 1.53 | 35 | 7.6 | 1.15 | 26.7 | 666 |
| 3 | 70 | 19 | 9.8 | 1.53 | 50 | 9.1 | 1.53 | 31.2 | 939 |
| 3 | 70 | 19 | 9.8 | 1.53 | 70 | 10.7 | 1.53 | 32.0 | 1006 |
| 3 | 95 | 19 | 11.5 | 1.53 | 50 | 9.1 | 1.53 | 34.4 | 1186 |
| 3 | 95 | 19 | 11.5 | 1.53 | 70 | 10.7 | 1.53 | 35.3 | 1253 |
| 3 | 120 | 19 | 12.8 | 2.04 | 70 | 10.7 | 1.53 | 39.7 | 1539 |
| 3 | 185 | 37 | 16 | 2.04 | 50 | 9.1 | 1.53 | 45.0 | 2074 |
| 3 | 240 | 37 | 18.4 | 2.04 | 50 | 9.1 | 1.53 | 49.4 | 2591 |
Company introduction
Zhenglan Cable Technology CO., Ltd.,formerly known as HENAN Zhengzhou Cable Co., Ltd., is one of the large scale backbone enterprises in China's wire and cable industry. The company's registered capital is about 4 million 6 thousand yuan and its headquarter is located in 49 floor of the South Tower of the Greenland Center of Zhengzhou high railway station (Petronas Twin Towers). The factory is located in the Zhengzhou cable science and Technology Industrial Park of the Wuzhi industrial area. It is a modern industrial park integrating advanced research and development technology and production technology.
FAQ
Is your company a factory or a trade company?
Factory, more than 20 years in China
How long can I expect to get the sample?
After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3~7 days. You can use your own express account or prepay us if you do not have an account.
What are your payment terms?
We normally accept T/T 30% deposit, 70% balance before delivery as the main payment terms, and other payment can also be negotiated. Trade assurance on Alibaba is also available.
What’s the delivery time?
Sample order needs 3~5 days. Formal order depends on the quantity. Usually it needs 7-30 days after get your payment.
What is your MOQ?
Generally it is 5000m.
We are China IEC 60502-1 Aerial Insulated Cable Of Rated Voltage Up To And Inculding 1KV AL/XLPE manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Tags: 1KV Aerial Insulated Cable, IEC 60502-1 Aerial Insulated Cable, IEC 60502-1 aerial power cable, Overhead Insulated CableSimilar Or Related
-
Aluminium Aerial Bundled Conductors ABC 1×16+1×25 3×16+1×25
-
Single-Layer Or Multi-Layer Overhead Insulated Cable For Transmit Electricity
-
Triplex Overhead Insulated Cable Low Voltage Overhead Power Lines
-
10kv Single Core Abc Xlpe Cable Aerial Insulation Line NFC33-209 Standard(Overhead Insulated Cable)
Quick Contact
If you have any questions or would like to book a session please contact us.
