XLPE PVC PE Abc Aluminium Cable Five Core For Aerial Power Transmission

XLPE PVC PE Abc Aluminium Cable Five Core For Aerial Power Transmission

Standard of ABC Aerial Bundled Cable

IEC228, IEC209, IEC60502, ASTM ANSI/ICEA S-76-474, NFC 33-209,HRN HD 626 S1 / DIN VDE 0276 part 626 / BS7870/ GB/T12527-2008

Type of ABC Aerial Bundled Cable

Production Range of ABC Aerial Bundled Cable

Voltage: 1kv, 10kv, 35kv

No. of cores: 1, 2, 3, 4, 5, 3+1, 4+1, 3+2

Nominal cross sectional area: 10~1500mm2

Construction of ABC Aerial Bundled Cable:

Phase conductor: copper, aluminum, aluminum alloy stranded

Neutral conductor: aluminum stranded(AAC), aluminum alloy stranded(AAAC), Aluminum conductor steel reinforced(ACSR)

Insulation: PVC, XLPE, PE 

(Remark: This is just the normal construction. HUANGHE CABLE can also design and produce the cables according to your special requirement.)

Application of ABC Aerial Bundled Cable:

Insulated Single Core Aerial Cable

Covered line wire is used primarily for overhead secondary distribution lines.It is not an electrically insulated conductor and is treated as bare conductor when installed.

Duplex Service Drop Cable

To supply 120 volt aerial service for temporary service at construction sites, outdoor or street lighting. For service at 600 volts or lower at a conductor temperature of 75 °C maximum.

Triplex Service Drop Cable

To supply power from the utility’s lines to the consumer’s weatherhead. For service at 600 volts or less (phase to phase) at a conductor temperature of 75°Cmaximum for polyethylene insulation or 90°C maximum for cross linked insulation.

Quadruplex Service Drop Cable

Used to supply 3 phase power, usually from a pole-mounted transformer, to the user’s service head where connection to the service entrance cable is made. To be used at voltage of 600 volts or less phase to phase and at conductor temperature no to exceed 75°C for polyethylene insulated conductor or 90°C for cross linked polyethylene insulated conductors.