ABC Cable Wire

ABC Cable Wire

1.20 years Factory Direct Sales

2.Duplex, Triplex,Quadruplex Cable available

3.IEC/BS/ASTM/NFC/BS Standard available

1). Specification:

1.Aluminum Wire,1350-H19 for Electrical Purposes.

2.Aluminum Conductors,Concentric-Lay-Stranded.

3.Aluminum Conductors Coated Steel Reinforced(ACSR).

4.Concentric-Lay-Stranded 6201-T81 Conductors

5.Service drop cable meets or exceeds all applicable requirements of ANSI/ICEA S-76-474.

2). Application:

Primarily used for overhead service applications such as street lighting,outdoor lighting,and temporary service for construction.To be used at votages of 600V phase-to-phase or less and at conductor temperatures not to exceed 75°c for polyethylene insulated conductors or 90°c for crossliked polyethylene(XLPE) insulated conductors.

3.) Duplex,Triplex,Quadruplex ABC cable http://www.electriccablechina.com [email protected]

3.1 Duplex Service Drop

Applications

To supply 120 volt aerial service for temporary service at construction sites, outdoor or street lighting.

For service at 600 volts or lower at a conductor temperature of 75°C maximum.

Construction : Concentic strand or compressed 1350-H19 conductor, polyethylene or cross linked polyethylene insulation,

concentric strand AAC, ACSR, or 6201 alloy neutral messenger.

3.2 Triplex Service Drop

Applications

To supply power from the ulility`s lines to the consumer`s buildings.

For service at 600 volts or less(phase to phase ) at a conductor temperature of 75 °C Maximumfor PE insulation or 90 maximum for XLPE insulation.

Construction :Concentic strand or cmpressed 1350-H19 conductor,

polyethylene or cross linked polyethylene insulation

concentric strand AAC, ACSR, or 6201 alloy neutral messenger.

3.3 Quadruplex Service Drop

Applications

Used to supply 3 phase power, usually from a pole-mounted transformer to the service-entrance conductor at the use`s building.

To be used at voltages of 600 volts or less phase to phase and at conductor temperature not to exceed 75°C for PE insulated conductors or 90 for XLPE insulated conductors.

Construction:Conductors are concentrically standed, compressed 1350H19 aluminium.

Insulated with either polyethylene or XLPE.

Neutral messengers are concentrically stranded 6210 AAAC, AAC or ACSR.