6 mm2 Solar Panel Cable with TUV Certification

I. Application

Widely used in indoor and outdoor solar system equipments as installation cables.

Features: No halogens, cold resistant, UV resistant, ozone resistant and weather resistant; Flame retarded, cut resistant and penetration resistant; Cable protection level II.

Working temperature: -40℃ ~ +90℃;

Maximum temperature of conductor: 120℃ (200℃ is permitted for 5 seconds during short circuit.

Rated Voltage: AC0.6/1kV DC1.8kV

Designed lifetime: 25 years.

II. Structure

Conductor: Tinned Copper 2.5, 4, 6, 10, 16mm2PV1-F

18, 16, 14, 12, 10, 8, 6, 4, 2mm2PV wire

Insulation: No halogens Thickness > 0.5mm, and follow clients’ requirements.

Jacket: Material without halogens Thickness > 0.5mm

Employing 150℃ bearable material with no halogens. The material uses modified polyolefin resin as principal raw material and adds no halogens fire retardant, heat stabilizer, smoke suppressor, mould inhibitor etc. and it doesn’t contain heavy metals and phosphorus and the material conforms to ROHS, with very little resistance change as immersed into water.

Here are the typical dimension diameters

III. Printings

Printed on the cable surface as “2Pfg 1169 PV1-F 1×4.0mm2Luoyang Da Yuan Cable Co., Ltd.” Space length between strings are shorter than 550mm.

IV. Current-Carrying Capacity

Current-carrying capacity of 4.0 mm cable at ambient temperature 60℃ with conductor temperature no higher than 120℃:

Single cable in air: 55A;

Single cable on object surface: 52A;

Multiple cables on object surface: 44A.

Current-carrying capacity changing coefficient under different ambient temperature:

V. Other tests and experiments our products have been through.

1. DC resistance test.

2. Water soaking high-tension current penetration test.

3. Long time water soaking high-tension current penetration test.

4. Insulation resistance test.

5. Jacket resistance test

6. High temperature and high-tension current penetration test.

7. Damp-heat environment test.

8. Resistance to acid-base solution test.

9. Consistency test.

10. Impact test under low temperature.

11. Bending test under low temperature.

12. Ozone resistance test.

13. Weather resistance and UV resistance test.

14. Kinetic penetration test.

15. Dent resistance test.

16. Jacket heat shrinkage test.

17. Vertically burning test.

18. Halogens content test.

19. Mechanical property of insulation and jacket.

20. Thermal elongation test.