15 Holes Steel Angle Bar 1090 X 40 X 40mm For Telecom Cables

Application

Cross-arm with 15 holes can be used for pole, extension bracket, polt mounting on fiber optic and copper networks

Installation:
On concrete poles with 2 cross-arm brackets and 2 assembly bolts 1/12
On wooden poles with a cross-arm bracket and 2 assembly bolts 1/12
Possible to install a drop anchoring plate at the extremity.

Introduction

Cross-arm 15 holes Angle bar metal 1090 x 40 x 40mm with 15 holes spaced by 60mm. This cross-arm is used for the parallel deployment of telecom cables on poles initially dedicated to low voltage networks.

Our service

1, Product consulting service
2, Cost-saving advice
3, Fast response speed to needs
4, Professional and complete reference documents
5, Safe and cheap transportation solutions
6, 7*24 Hours After Sales Service

Contact us

Email: [email protected]

Whatsapp/Tel: 86-18600124328

Web: www.getotelecom.com

Company

Introduction

The cross-arm 13 holes is an angled bar section used for roll-out overhead parallel lines. Equipped with 13 holes this pole bracket mounts on a bracket compatible with the pole to be equipped. Its role is to enable fastening points for deadending and suspension applications.

Thanks to its 820mm length, this pole hardware preserves cable against environmental constraints by offsetting them from the poles.

Crossarm 13 holes can receive multiple drop cross-arm brackets at it extremity, enabling thus to anchor drops perpendicularly to the main network.