138KV HDG 35M Electric Utility Pole With Baseplate And M48 Anchor Bolt 60-90 Degree

138KV HDG 35M,Single Circuit Pole with baseplate and M48 Anchor bolt 60-90degree

Product Description

The products above are 138KV HDG 35M,Single Circuit Pole with baseplate and M48 Anchor bolt 60-90degree

• Products are designed and manufactured according to ANSI/TIA-222-G structural standards
• Only our company can comply to these global manufacturing standards which gives us an edge over our competitors
• Products are hot dip galvanized according to ISO 1461/ASTM A123 standards
• Pole shaft material : ASTM GR65,GR50,Q460 A572,S355,Q345/Q235,etc
• Material code : GB/T1591-2008,GB/T700-2006
• We possess the ISO 9001:2015 certification and are committed to giving our customers the best products and service
• We provide additional assistance if required including supervision and supplementary components
• We accommodate various designs according to our customers’ specifications

UNITS OP MEASUREMENT Metric or system international (S.I.) units of measurement shall be employed in all correspondence, Technical Schedules and drawings. Angular measurement shall be in degrees, with 90° comprising one right angle. 1.7 LANGUAGE English Language shall be used in all documents contained in the Tender and in all correspondence between the Contractor and DES. Whenever any item is required under the terms of the Contract to be written, marked, printed or engraved, the English language shall be used except where otherwise stated in the specification. 1.8 CORRESPONDENCE All correspondence on matters arising out of the Contract shall be addressed by the Contractor to:- The Director, Department of Electrical Services, Old Airport Road, Berakas, Bandar Seri Begawan BB3510, Negera Brunei Darussalam. 1.9 SAFETY OF PERSONNEL The Contractor shall provide a full time Safety Officer having the necessary competency and experience to the approval of the Engineer at site. Maximum safety precautions consistent with good erection practice in all site works must be afforded to the personnel directly engaged on this Contract. A Safety Manual shall be submitted by the Contractor to DES for approval before commencement of site work. All such safety requirements shall conform strictly to the prudent occupational safety and health regulations and pertinent industry practices being adopted.

• Price Term : FOB, CFR or CIF

– The price stated includes pole shaft, base plate, cross arms, anchor bolts and any additional accessories required.

– Shipping Port: Shanghai Port. For FOB, CFR or CIF quotes, please specify which exact shipping model you require, then inform us of the quantity of your order so that we can accurately calculate the local transport charges and sea freight.

• MOQ : 1 set for customized
• Payment: 30% by T/T as initial deposit, remaining balance by T/T or L/C at sight before shipment. Other payment terms can be negotiated.
• Delivery Time : Goods will be ready for shipment within 10 working days after receiving initial deposit
• Warranty : 30 years
• Surface Treatment : Hot Dip Galvanization