1.1kv Overhead Insulated Cable Aerial Bundled Cable 1x185sqmm Al/Xlpe IEC60502-1

1.1kv overhead insulated cable aerial bundled cable 1x185sqmm al/xlpe as per IEC60502-1

Conductor:
1. Aluminum Wire, 1350-H19 for Electrical Purposes.
2. Aluminum Conductors, Concentric-Lay-Stranded.
3. Aluminum Conductor, Concentric-Lay-Stranded, Coated Steel Reinforced (ACSR).
4. Concentric-Lay-Stranded 6201-T81 Conductors.

Insulation: PVC, XLPE, PE

Standards:
GB/T 12527-2008, IEC60502,
Rated voltage: 0.6/1kV
Relative manufacturing standards: IEC61089, ASTM B231, ASTM B232, BS215, DIN48201, DIN48204.
We can also manufacture ABC cable according to customer's special requirements.

1.1kv overhead insulated cable aerial bundled cable 1x185sqmm al/xlpe as per IEC60502-1​​ Application:

Laid on cable ladder, tray, in duct in a thermal insulated wall, on a wall or spaced from wall, on the dry and closed cable trench in workshops, building; from source to machine or device, in duct in the ground…

Below construction are also commonly used around the world.

A) Duplex Service Drop
Applications:To supply 120 volt aerial service for temporary service at construction sites,outdoor or street lighting . For service at 600 volts or lower at a conductor temperature of 75 maximum.

B) Triplex Service Drop
Applications: To supply power from the ulility`s lines to the consumer`s weatherhead. For service at 600 volts or less(phase to phase ) at a conductor temperature of 75 maximum for PE insulation or 90 maximum for XLPE insulation .

3 cores consisting of standard aluminium conductors, insulated with XLPE insulation
+ One sheath lighting aluminium conductor with XLPE insulation(optional)
+ One messenger Al-alloy conductor (bare or covered)
The messenger conductor can be of galvanised steel wire also.
The purpose of messenger wire is
A) It acts as load bearing wire.
B) It acts as earth or neutral conductor.

It meets or exceeds the following specifications:

C ) Quadruplex Service Drop
Applications: Used to supply 3 phase power , usually from a pole-mounted transformer to the use`s servic head where connection to the service entance cable is made . To be used at voltages of 600 volts or less phase to phase and at conductor temperature not to exceed 75 for PE insulated conductors or 90 for XLPE insulated conductors.

Overhead insulated cables' main features
1. High power supply reliability. The use of overhead cable can greatly reduce all kinds of short-circuit faults (especially the common flashover faults of overhead bare conductor), and the fault rate is 4-6 times lower than that of overhead bare conductor.
2. Good power supply security. When the overhead cable is energized, when the human body or other animals accidentally touch the cable insulation surface, as long as the cable is not broken down, it will not cause harm to people and animals.
3. Convenient erection and maintenance. Overhead cables can be erected on any kind of pole and tower or along the wall. In special cases, they can also pass through the trees and be directly fixed on the tree pole with hardware. There is no need for special patrol inspection, and there will be no short-circuit tripping accident due to branch flashover, littering by residents, or false collision of crane boom, which greatly reduces the maintenance and overhaul of the line.
4. Reasonable economy. Although the overhead cable is more expensive than the overhead bare conductor, it is cheaper than the ordinary underground installation cable. Therefore, although the one-time investment of overhead cable is slightly higher, combined with other factors, its operation cost will be significantly lower than that of overhead bare conductor.

Aerial insulated cable's Advantage

The hard aluminum wire structure has the advantages of light weight, moderate tension, easy bending of cable, convenient installation and low project cost. It can be easily installed on the existing pole and tower. Generally, it is used in reconstruction or new construction projects.

1.1kv overhead insulated cable aerial bundled cable 1x185sqmm al/xlpe as per IEC60502-1​​ parameters

1.1kv overhead insulated cable aerial bundled cable 1x185sqmm al/xlpe as per IEC60502-1​​ product images

1.1kv AAC/XLPE overhead insulated cable aerial bundled cable 1x25sqmm IEC60502-1​​ factory Images

About Zhenglan Cable Technology Co., Ltd

Zhenglan Cable Technology CO., Ltd.,formerly known as HENAN Zhengzhou Cable Co., Ltd., is one of the large scale backbone enterprises in China's wire and cable industry. The company's registered capital is about 4 million 6 thousand yuan and its headquarter is located in 49 floor of the South Tower of the Greenland Center of Zhengzhou high railway station (Petronas Twin Towers). The factory is located in the Zhengzhou cable science and Technology Industrial Park of the Wuzhi industrial area. It is a modern industrial park integrating advanced research and development technology and production technology.

FAQ
Is your company a factory or a trade company?
Factory, more than 20 years in China
How long can I expect to get the sample?
After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3~7 days. You can use your own express account or prepay us if you do not have an account.
What are your payment terms?
We normally accept T/T 30% deposit, 70% balance before delivery as the main payment terms, and other payment can also be negotiated. Trade assurance on Alibaba is also available.
What’s the delivery time?
Sample order needs 3~5 days. Formal order depends on the quantity. Usually it needs 7-30 days after get your payment.
What is your MOQ?
Generally it is 5000m.