0.6/1kV Low Smoke Halogen Free Cable / Lszh Power Cable Indoor Installation

0.6/1kV Low Smoke Halogen Free Cable / Lszh Power Cable Indoor Installation

Low Smoke Halogen Free CableApplications:

These cables are used for electricity supply in low voltage installation system, They are suitable for installation in indoors and outdoors, in cable ducts, under ground, in power and switching stations, local energy distributions, industrial plants, where there is no risk of mechanical damage.

Insulation: Cross linked polyethylene compound is insulated over the conductors by extrusion process.The raw materials and thicknesses of Insulation are maintained as per standards and conform to IEC60502/BS7870 Standards as the case may be.

XLPE:Insulated Power Cable are identified either by colour or by numbers as follows:
No. of cores Identification
Old Colour coding New Colour coding as per different customers. Normally the color as below:
1 Red or Black Brown or Blue
2 Red & Black Brown, Blue
3 Red, Yellow Blue Brown, Black, Grey
4 Red, Yellow, Blue & Black Blue, Brown, Black, Grey
5 Red, Yellow, Blue, Black, Y/G Blue, Brown, Black, Grey & Y/G

Armour : Single core cables are armored with Aluminium Wires or Aluminum Tape armored based on requirement.

Three core: steel wire armored or Steel tape armored.

Outer sheath : Polyene Hydrogen Sheath , LSHO

Standards

International: IEC 60502, IEC 60227 IEC 60331, IEC 61034 60332

China: GB/T 12706-91 GB306.1-2001, GB/T18380.3-2001

Other standards such as BS,DIN and ICEA upon request

Low Smoke Halogen Free Cable Technical data

Rated voltage: 0.6-KV

Max. Conductor Temp.:normal (90℃), short circuit no more than 5 s (the highest temperature of conductor shall no more than 250°C )

Min. Ambient Temp.:The cable shall be pre heated if the ambient temperature is below 0°C

Min. Bending Radius: single core cable 20(d+D)±5% ,Multi-core cable 15(d+D)±5%

Low Smoke Halogen Free Cable Details

Packaging